Archive for March, 2014

A quick tutorial to using MiniPiio AIN4 4-ch Analog Board

March 28th, 2014 No comments

The latest version of raspi-config allows you to enable the SPI drivers without having to edit raspi-blacklist.conf file yourself.

In LXTerminal start raspi-config by type:


Select the advance menu option and chose enable SPI devices. Exit the menu and reboot your Pi.

We’ll program our example in Python, so we’ll start by downloading the SPIdev driver library.

We can use Python Installer to get install it:

sudo pip install spidev

A quick python example is shown below:

[code language=”python”]

import spidev
import time

# ADC Channel

# Open SPI, use Chip Select 0
spi = spidev.SpiDev(),0)

while True:

adc = spi.xfer2([1,(8+ADCCHAN)<<4,0]) data = ((adc[1]&3) << 8) + adc[2] print ('ADC CH1 =', data) [/code] The MiniPIIO Uses a Microchip MCP3004 (or MCP3204) which are from the same ADC familily as the MCP3008 You can find the MiniPIIO AIN4 at our Tindie store:



New board – MiniPIIO Breakout!

March 21st, 2014 No comments

MiniPIIO Breakout! is our newest add-on board for the Raspberry Pi.

It breaks out (hence its name) all the Pi’s expansion I/O into four neat little groups.

UART is broken out into a 6-Way and 4-way pin header. The 6-Way is FTDI USB Cable compatable.

SPI is broken out into two 6-way headers, each with it’s own SPI chip select.

I2C is borken out into two 4-way headers.

GPIO is broken out into two 10-way headers. GPIO4/17/18/22/23/24/25/27 and 3.3V and 0V.


You can buy it at our Tindie store here

RPi-X SensoRPi – more photos & update

March 9th, 2014 No comments

We’ve got a couple of more photos to show you. This time the RPi-X SesnoRPi is mounted into a case.

RPi-X_SensoRPi+PiBow2 RPi-X_SensoRPi+PiBow1

Mounted into a case the SensoRpi is extremely ridged.

We’ve continued testing and the electronics are all confirmed working. So far we’ve tested it using Python and RPi.GPIO, next we’ll be testing it using Scratch with the GPIO extensions from Simon at Cymplecy.

Once we completed our Scratch software testing will be looking to extend our testing to Gordon’s wiringPi and RPIO

RPi-X ELab101 – mini electronics lab

March 7th, 2014 No comments

RPi-X ELab101 is the second of our RPi-eXperimeter boards.

RPi-X ELab101 is a mini electronics lab for the Pi.

It is dominated by a 170-pin bread boarding area for prototyping and construction your circuits on. Next to this, there are 3x tactile switches, 3x LED’s, 2x potentiometers and a buzzer circuit which make up the input and output devices. These are connected to female headers allowing them to be quickly interfaced with the Pi’s GPIO’s using simple male-male jumper wires.

For analogue measurements, a 4-channel 0V to 10V, 10-bit ADC is included and it’s inputs are also available via a female header connector.

Finally, all the signals from the Pi’s expansion header are brought out to female headers, giving access to all the Pi’s expansion signals, including the GPIO’s, SPI, I2C, UART and PWM.

More to come….

RPi-X SensoRPi – first photos

March 3rd, 2014 No comments

Here’s some photos of the first partially built boards: